Return to our home page
About Boling Engineering
Funbuzzer 1 Gaming System
Countdown Timer
Buzz Bell Box
Tacit Tutor
Battery Testers
INTERCOM PRODUCTS
FoneCom Intercom System
FlashLite Intercom Signal
Contact Boling Engineering

COUNTDOWN TIMER & BigDigit DISPLAY

Countdown to Fun!


Click here for standalone player
Download Windows Media Player Here

ctwremote.jpg (69444 bytes)
CDT-M COUNTDOWN TIMER
shown with Remote Control
   The CDT-S (seconds) and CDT-M (minutes)
COUNTDOWN TIMERS are just the thing for timing events and games.  The large, bright digits are easy to see from a considerable distance.  The COUNTDOWN TIMERS are controlled by means of four small push-buttons on the top of the unit.  Each of the two digits is first pre-set to the desired time by pressing the LOAD/PRE button and the PRE 10s or PRE 1s button simultaneously.  The COUNTDOWN TIMER begins the counting cycle when the RUN/STOP button is touched. The countdown sequence can be interrupted at any time by touching the RUN/STOP button.  The count is re-started by touching the button again.  The timer stops counting down and emits a BRAAP sound when a count of 00 is reached.  At any time that the counter is stopped it can be re-loaded to the previously pre-set count just by touching the LOAD/PRE button.

SHARED FEATURES of CDT-S and CDT-M
  • Large, easy to read display
  • Digits 3.3" high
  • BRAAP sound when time runs out at 00 seconds
  • 1/4" jack for connection to sound system
  • Pre-set count re-loads at the touch of a button
  • Separate pre-set buttons for 10s and 1s digits
  • Separate RUN/STOP button
  • Powered by wall-wart power supply (included)
  • Size: 7.5" wide X 4.3" high X 2.2" deep
  • BigDigit Output Option available ** See accessories to order BigDigit Display
  • Wired remote control option available


CDT-S (Seconds) SPECIFIC FEATURES

  • Tick-tick-Tick-tick sounds as seconds pass
  • Timer interval pre-settable from 1-99 seconds

CDT-M (Minutes) SPECIFIC FEATURES

  • Timer interval pre-settable from 1-99 minutes
  • 1-second blinking yellow LED running indicator
  • Display flashes during 01 count
 
STEP 1: Choose your COUNTDOWN TIMER
CDT-S (1-99 seconds) COUNTDOWN TIMER only $149.95     
Quantity:
CDT-M (1-99 minutes) COUNTDOWN TIMER only $199.95
Quantity:
 
STEP 2: Choose COUNTDOWN TIMER Add-ons - Factory installed, must be
ordered at the time of purchase.
  • BigDigit Output Option
    Provides dual outputs for 2 BigDigit
    Displays. (Sold separately, see Accessories
    below.) Required for BigDigit operation
 $49.95
Quantity:
  • Wired Remote Control
 $74.95
Quantity:
  

Accessories

BigDigit Large Display Option for Big Events

Our basic CountDown Timer is just the thing for quiz games and contests, but to use it on the basketball court as a shot clock or in a large auditorium or conference room, you’ll want to AMP IT UP with our BigDigit remote displays.  These displays are a big, easy-to-see-and-read 6.5 inches high, and plug into the CountDown Timer with BigDigit option, which serves as the system controller. 

The CountDown Timer with the BigDigit output option is the heart of the system.  Add one or more BigDigits  to suit your application.  Each BigDigit comes with mounting brackets, power supply, and 100 feet of control cable.  A 00-count electronic horn sound is available from an output jack on the CountDown Timer which can be connected into the arena sound system.

bigdigit1.jpg (381409 bytes)
  • Digits 6.5 inches high
  • Wall-wart power supply
  • Mounting Brackets
  • 100-foot interconnecting cable
  • Size: 8.75" wide x 7.5" high x 2.2" deep
 BigDigit Display $199.95
Quantity:
Horn/Speaker Option
 Factory-installed option
1-second blast at end of
BigDigit count.
Audio output jack incl. 		$64.95
Quantity:
01 Minute Blinker
 Factory-installed option
Recommended for use
with CDT-M Timer 		$24.95
Quantity:
Splitter_04-14-09.jpg (270466 bytes) 5-Way Expander
The COUNTDOWN TIMER
with BigDigit option already
has output connectors for 2
BigDigit Displays. If more than
2 Displays are needed for
your system, this 5-way
expander provides additional
outputs for as many Displays
as you require.
5-Way Expander		 $9.95
Quantity:
T-Connector_04-30-09.jpg (190397 bytes) 100-foot Extender Cord
If the 100-foot cord that comes with  
each BigDigit Display isn't long
enough, order these 100-foot cords
to extend the separation distance.
An in-line coupler is required to join
the cables together in extension
cord fashion. A "Y" coupler is used
when Displays are to be daisy-
chained.		 100' Extender Cord $14.95
Quantity:
In-Line Coupler $1.95
Quantity:
"Y" Coupler $9.95
Quantity:
ATTENTION Previous COUNTDOWN TIMER Customers:

Any COUNTDOWN TIMER(s) sold previously can be retrofitted with the factory-installed options now offered. You can order the desired upgrade(s) through our shopping cart and return your COUNTDOWN TIMER(s) to the factory for installation. If you are ordering the BigDigit output option for your Timer, you must order the BigDigit Displays as separate items (see above).
Just ship your COUNTDOWN TIMER(s) to us at the following address: Boling Engineering Associates, 2018 Frances Drive, Garland, TX 75042.

The options will be installed and your TIMER(s) and any accessories you have ordered will be shipped to you within 4 weeks.


BigDigit Conversion
$49.95
Quantity:

Wired Remote Control
$74.95
Quantity:

Applications: Clock Timer, Clock Timers, Count Down Clock, Count Down Clocks, Count Down Timer, Count Down Timers,
Countdown Clock, Countdown Clocks, Countdown Timer, Countdown Timers, Digital Timer, Digital Timers, Display Timer, 
Display Timers, Electronic Timer, Electronic Timers, Event Timer, Event Timers, Game Clock, Game Clocks, Game Timer, 
Game Timers, Presentation Timer, Presentation Timers, Timer Display, Timer Displays, Shot Clock, Shot Clocks
SHIPPING OPTIONS:

After entering your billing and shipping address information in our Secure Shopping Cart, you will be given the shipping options listed below to choose from with the cost of each displayed to enable you to make a choice. 

 We ship same day for Express-shipped orders (Express Saver, 2nd Day, and Overnight) received no later than 5:00 pm CST Monday through Friday.  For Ground and Home Delivery shipments, we ship within business days.  The day of order does not count as one of the business days!

FedEx Ground (business) or Home Delivery (residence) takes 4-5 business days to get to you once shipped.  Allow a total of 7-8 business days when figuring arrival time.

FedEx Express Saver provides delivery within 3 business days by 4:30 pm; 7pm to residential addresses.
FedEx 2Day provides delivery Monday through **Saturday by 4:30pm in 2 business days to most US locations; 7pm to residential.
FedEx Standard Overnight provides delivery by 3pm the next business day.
FedEx Priority Overnight provides overnight delivery Monday through 
**Saturday by 10:30 am next day to most US addresses.

FedEx First Overnight provides delivery by 8:30 am next day.

**Saturday delivery available using 2nd Day and Priority Overnight options and involves an additional $10.00 delivery fee. Add this charge to your order now, if desired.
Saturday Delivery $10.00
Quantity:
 


SPECIAL ORDERING INSTRUCTIONS FOR TAX EXEMPT CUSTOMERS

  • If you are a Texas agency with a Tax Exempt Status, click here (purchases outside of Texas are automatically Tax Exempt)

SecurityMetrics Credit Card Safe

BOLING ENGINEERING ASSOCIATES
P.O. Box 462535      Garland TX 75046-2535      Phone 972-276-5073